4.7K Rotary Wire Wound Potentiometer

A rotary wire wound potentiometer can open up many fascinating UIs. Turn the pot and the resistance changes. When the Vcc is connected to the outer pin and the ground (GND) pin is connected to the other, the pin in the middle will have a voltage that changes from 0 to VCC contingent upon the rotation of the pot. You get a variable input from when the center pin is connected to an ADCon a microcontroller.

The diameter of the pot is about 1/4" and a linear taper of 4.7k also written as 4k7. This pot has a ¼" mounting measurement and has a 4.7K direct decrease. Check the datasheet for dimensional illustrations and for other useful information.

NGN 550.00

Qty:  Add to Cart

Currently item(s) in cart.

Specifications

Resistance: 4.7K-Ohms
Resistance tolerance: 5%
Rated Power: 1.0 Watt
Technology: Wire wound potentiometer
Sliding Noise: less Than 47millivolt (mV)
Total Rotation: 300° +/- 5°